Scan before you drill

Home / Jobs / Renovators and homeowners

Jobs for renovators and homeowners

Concrete scanning for renovators and homeowners

A TV bracket on a concrete wall, a mirror cabinet over the basin, a new kitchen. In a flat with concrete or brick walls, pipes and cables are often cast or chased into the wall, with no studs to guide you.

Before you drill a wall at home

Stop and call a structural engineer and a cutting contractor if

  • you want a new doorway or opening in a concrete wall
  • the opening could change how the building carries load

The short version of this page. The details and sources follow below.

US
drywall, stud finder, wall anchor, outlet
UK
plasterboard, rawlplug, socket, tiled splashback

The jobs

  1. 01A tiled bathroom wall

    Two pipes in a chase and a cable to the socket, behind tiles.

    Tiles demo below

  2. 02A shelf or TV bracket

    Three anchors in a concrete wall with mesh on both faces: scan a line across them, then lines at 90 degrees.

    Anchors in the scan lab

  3. 03A new doorway

    A structural opening, so it needs an engineer and a cutting contractor.

    Opening in the scan lab

Try the job in 3D

Tiles on a brick wall: two plastic pipes, a basin feed and the cable to a socket. Tiles are our assumption here, not something Screening Eagle has published.

One situation from the Scan lab, which has all eleven.

How pros do it

  1. Tiles and foil can confuse wall scanners. Bosch lists what can impair its own scanner: moisture, metal building materials, foil-laminated insulation, and conductive wallpaper or tiles1.
  2. Find the direction of a run. Bosch finds the direction of an object in a wall by moving along several offset paths, one after another1.
  3. Openings are for professionals. A cutting contractor's first advice to a builder is to sub the job out2.
  4. Hiring a scan is an option. One homeowner had a professional scan his floor, thinks it cost only a couple hundred dollars, and calls it completely worth it3.

From the trade sources listed below, opened 16 November 2026. They describe professional practice in general, mostly with GPR, not Eagle XR.

A person holds the Eagle XR scanner in one hand and a smartphone in the other
The flat scanning face of Eagle XR, official render

This side goes flat on the surface.

How it is held. The scanner pairs with the phone you already carry. You hold one in each hand. Still from Screening Eagle's launch film; render from Screening Eagle's partner kit.

Where Eagle XR fits

  • Serious homeowners are on Screening Eagle's list of users4.
  • It lists pipes, cables, rebar and voids5. Materials: concrete (dry, normal or wet), drywall and masonry (brick and block) on the App Store listing5, while the product page says Eagle Intelligence is trained on concrete and learning more materials4.
  • It pairs with your phone, and the iPhone app is free5.
  • It is CHF 3,950, EUR 4,190, USD 4,830 or GBP 3,590, excluding VAT, import taxes and delivery4: a tool for people who drill concrete often.

Where it does not

  • Scanning through tiles or foil-backed board, and telling a live cable from a dead one: not in Screening Eagle's published facts (see the questions).
  • A used, activated or registered scanner cannot be returned under the shop's policy6. Try the Scan lab first.

Questions renovators and homeowners ask

Does it work through tiles or foil-backed plasterboard?Not published

Not published: tiles and foil-backed board are not among the materials listed under Where Eagle XR fits. Ask Screening Eagle before you rely on a scan through them.

Will it find the wiring in my walls?App Store listing, not published

It lists cables, but whether it tells live from dead is not published. Switch the circuit off and prove it dead before you drill near one.

Can I send it back after my renovation?Shop return policy

Not once it has been used. The return policy allows 14 days from receipt for an undamaged scanner in its complete original packaging6. Your legal rights for a defective product are separate.

Which phone do I need?App Store listing

An iPhone with iOS 18.2 or later, or an Android phone through Google Play. The iOS requirement is on the App Store listing5; a minimum Android version has not been published, so open the Google Play listing on your phone to see whether it installs.

Can I knock a doorway through a concrete wall myself?General

Not something a scanner decides: a new opening in a concrete wall can change how the building carries load. Ask a structural engineer first.

Anything else: search every answer on this site on Before you buy, or ask Screening Eagle directly.

Ready for your own job?

CHF 3,950per scanner, excluding VAT, import taxes and delivery. Ordering happens on Screening Eagle's shop.

Buy in Solar Gold

Partner link: we may earn a commission. You pay Screening Eagle's normal price.

  • Sold and shipped by Screening Eagle
  • Same price in all four finishes
  • Card, Apple Pay or Google Pay
  • Express shipping from Switzerland. US orders ship from Pennsylvania

Sources

  1. Bosch, Wallscanner D-tect 200 C Professional, original instructions (2021), read 16 November 2026, homelectrical.com
  2. Journal of Light Construction, Cutting Concrete: How a Pro Breaks Through, read 16 November 2026, jlconline.com
  3. The Garage Journal forum, Rebar detector, read 16 November 2026, garagejournal.com
  4. Screening Eagle, Eagle XR product page and FAQ, read 15 November 2026, xr.screeningeagle.com
  5. Apple App Store, Eagle XR listing by Screening Eagle Technologies AG, read 15 November 2026, apps.apple.com
  6. Screening Eagle, official Eagle XR shop and return policy, read 14 November 2026, store.screeningeagle.com

Summary

This page explains how to check walls before drilling and where Eagle XR fits. Tiles, foil and damp can confuse scanners, and new openings in concrete walls need professionals.

  • For a one-off job, think about hiring a professional scan.
  • Check for tiles, foil-backed board or damp, which can confuse wall scanners.
  • Screening Eagle has not published whether Eagle XR works through tiles or foil-backed board. Ask before relying on a scan through them.
  • Scan several offset lines to find which way a pipe or cable runs.
  • Whether Eagle XR tells live from dead is not published. Switch the circuit off and prove it dead before drilling near a cable.

Stop and call a structural engineer and a cutting contractor for a new doorway or opening in a concrete wall.

A short version of this page, written by AI from the page's own text on 18 November 2026 and checked against it. The details and sources are on the page.