Scan before you drill

Home / Rent or buy

Costs hire a firm, rent a tool, or own one

Rent, hire or buy a concrete scanner?

Three ways to know what is inside a slab before you drill: call a scanning firm, rent a scanner, or own one. What each costs where a price is published, what you get for the money, and when each is the right call.

Every price below is quoted from the firm's or hire shop's own page, or from the article named, in its own currency, read on 16 November 2026. We have not converted anything. Where we found no price, we say so. This site is run by a Screening Eagle partner and links to Eagle XR.

The three ways

What each one costs, what you get, and what you do not get.

  1. Call a scanning firm

    Concrete scanning services, GPR scanning company
    What it costs
    • USD 200 an hour with a 2 hour minimum at an Oregon firm1; USD 175 an hour at an Ohio firm, where "a two-hour minimum is often appropriate"2. Two hours: USD 350 to 400.
    • USD 150 to 350 an hour in Texas, one firm's own range3.
    • About USD 1,000 to 3,000 a day for GPR concrete scanning, a vendor's market estimate4.
    • GBP 150 to 400 a visit in the UK, from a trade blog, not a firm's own rate5.
    • Germany, Switzerland, Austria and France: No price found No firm published one that we could find. Ask two or three for a quote.
    You get

    An operator who reads the data: Penhall describes "real-time interpretation of scan data by a trained technician"6. A marked surface, which it calls "the primary deliverable"6. A report when the job needs one: "where required, a written scan report with radargram images, annotated depth maps, and a findings summary"6; a Texas firm lists "field markings, PDF exhibits, written reports, and GPS-referenced documentation, depending on project scope"3. Some firms state they are insured: "an accredited, insured Ohio practice"2, "Registered and Insured"1. What a firm answers for if something is still hit is in its contract, not on its price page.

    You do not get

    The scanner there before every hole. You book a visit, and outside one firm's home area "a travel fee may be charged"1.

  2. Rent a scanner

    Concrete scanner rental, rebar scanner hire
    What it costs
    • Concrete radar (GPR) in the US, from one Florida hire firm: USD 350 a day or USD 1,400 a week for a GSSI StructureScan Mini XT7; USD 395 a day or USD 1,395 a week for a Hilti PS 1000 X-Scan, USD 550 a day for a GSSI 3-D concrete unit, delivery USD 129 each way8. A Leica C-Thrue on a rental marketplace: USD 749 a week, USD 2,149 a month9.
    • Concrete radar in the UK, Germany, Switzerland and Austria: No price found
    • A wall detector, which is not radar: EUR 22.00 a day excluding VAT in Germany, EUR 17.60 from 5 hire days10; CHF 23.00 a day or CHF 92.00 a week excluding VAT in Switzerland11; GBP 20 a day from a private owner in London12. The two hire pages give 150 mm and 120 mm maximum detection depth1011. Hilti Switzerland's fleet rental list names its PS 85 wall scanner, with prices only after log-in and a minimum hire of 5 working days13.
    You get

    The tool, for the days you pay for. The Florida firm includes a "How-to guide for first-time users" with the Mini XT7. Hands-on training is extra: its one-day concrete scanning course "starts at $1,995"8.

    You do not get

    The skill, or the cover. The same firm says it itself: "Renting GPR means learning curve + liability"8. On its rental form the renter releases it "from any injury, property damage, or financial loss arising from use or misuse of equipment"7. Reading the picture, and any hit, stay with you.

  3. Own one

    Eagle XR, the pocket scanner this site is about
    What it costs
    • Eagle XR: CHF 3,950, EUR 4,190, USD 4,830 or GBP 3,590, excluding VAT, import taxes and delivery14. Once.
    • Expected dispatch for every finish: December 202615.
    You get

    A scanner in your bag before every hole. It pairs with the phone you already carry and shows rebar, cables, plastic pipes and air voids, each in colour at its depth, to a stated 40 cm14. Scans are "saved, synced and shareable"14. Screening Eagle calls it "a first look for everyday work", so you know "whether it's clear or whether to call an expert"14.

    You do not get

    A GPR survey, or a report for someone else. For "investigations, mapping and reports" Screening Eagle points professionals to GPR systems14, and it says Eagle XR does not replace an expert14. Owning one does not replace the scanning firm on post-tensioned slabs, structural cuts or anything that needs a report.

Prices by region, and where we found none

The same figures as above, by country. "No price found" means we searched on 16 November 2026 and no firm or hire shop published a price we could read. It does not mean nobody offers the service. "Not checked" means we did not look.

RegionScanning firmConcrete radar to rentWall detector to rentEagle XR, once
United States
USD 150 to 350 an hourtwo hours at two firms: USD 350 to 40012; about USD 1,000 to 3,000 a day, an estimate4
USD 350 to 550 a dayUSD 749 to 1,750 a week789
Not checked
USD 4,830excluding VAT, import taxes and delivery14
United Kingdom
GBP 150 to 400 a visita trade blog's range5
No price found
GBP 20 a daya private owner, GBP 70 for 7 days12
GBP 3,590excluding VAT, import taxes and delivery14
Germany
No price found
No price found
EUR 22.00 a dayexcluding VAT, EUR 17.60 from 5 days10
EUR 4,190excluding VAT, import taxes and delivery14
Switzerland
No price found
No price found
CHF 23.00 a dayCHF 92.00 a week, excluding 8.1% VAT11; Hilti PS 85 wall scanner: price after log-in, 5 working days minimum13
CHF 3,950excluding VAT, import taxes and delivery14
Austria
No price found
No price found
No price found
EUR 4,190excluding VAT, import taxes and delivery14
France
No price found
No price found
No price found
EUR 4,190excluding VAT, import taxes and delivery14

Our arithmetic, not a source: at USD 4,830 the scanner equals about 7 to 14 US visits at USD 350 to 700217, or about 9 to 14 days of US radar rental at USD 350 to 55078. At GBP 3,590 it equals about 9 to 24 UK visits at GBP 150 to 4005. That leaves out VAT, import taxes and delivery on the scanner, and it sets a first-look scanner against a specialist's GPR service, which are not the same thing. The USD 700 is a firm manager's figure from a 2019 article.

Which one when

Match the option to the job, not to the price.

  1. A post-tensioned slab, or you are not sureScanning firm, and the engineer

    A scanning firm's own rule: "treat the slab as post-tensioned until a scan shows otherwise"16. One firm keeps "a 3-inch buffer from every tendon"16.

  2. A structural cut, a new opening, a large coreScanning firm, and the engineer

    A scan shows what is inside. Whether the cut may be made is the structural engineer's decision, not the scanner's.

  3. Someone needs a report: an engineer, a main contractor, an insurerScanning firm

    A firm delivers "a written scan report" where required6. For reports, Screening Eagle points professionals to GPR systems, not to Eagle XR14.

  4. One large job, and someone on the crew is trained on radarRent concrete radar

    By the day or the week78. If nobody is trained, budget for it: one Florida course starts at USD 1,995 for a day8.

  5. Plasterboard, a stud, a live cable near the surfaceRent or borrow a wall detector

    About EUR 22 or CHF 23 a day1011. The hire pages give 150 mm and 120 mm maximum detection depth: a wall detector, not a look into a slab.

  6. Anchors, small cores, chases and cable routes, week after weekOwn a first-look scanner

    This is the job Screening Eagle names for Eagle XR: "before every hole, core or cut"14, so you know whether it is clear or whether to call an expert14.

No scan rules a hit out. In Penhall's words, a slab scan "reduces risk dramatically but does not eliminate it entirely"6.

Payback your numbers, our arithmetic

Does it pay for itself?

Count only the checks a first look can do: anchors, small cores, chases, a cable route. Post-tensioned slabs, structural cuts and anything that needs a report still need the scanning firm.

How do you check before drilling today?

The price of about 14 visits

At USD 350 a visit (two hours at an Ohio firm's rate1), the scanner price of USD 4,830 equals about 14 visits.

Before tax: the scanner price excludes VAT and sales tax. A visit here is a full scan by a firm; Eagle XR gives a first look and does not replace that scan for structural work.

Money spent on visits over 24 months against the scanner price
Buy in Solar GoldCHF 3,950 excluding VAT, import taxes and delivery

For scale: what one hit can cost

  • USD 15,400average US homeowners claim for water damage and freezing, 2019 to 2023, all causes.5
  • GBP 2,638average UK escape of water claim reported by the ABI, all causes (older data, to 2017).6
  • more than EUR 5,000average pipe-burst claim at one German insurer in 2025, all causes.7
  • GBP 300 to 1,200tracing and repairing a real leak in a wet underfloor heating pipe, UK, floor finish extra.8
  • GBP 300 to 500a structural engineer's visit with a short report, UK, before any repair.9

Insurance averages cover every cause, not only drilling. A scan lowers the chance of a hit; it does not rule one out.

How this is worked out, and sources

Months to pay back = scanner price divided by (cost of one visit or rental day, times visits a month, times the share a first look would do). The scanner price excludes VAT, import taxes and delivery; the quoted visit and hire prices are as each page shows them. Your own time, travel, the app and anything Screening Eagle has not published (battery life, warranty) are not counted. This is our arithmetic from your numbers, not a promise of savings.

  1. Arcbound Logic, Concrete GPR Scanning Cleveland and Northeast Ohio, arcboundlogic.com, read 16 November 2026.
  2. Rush Locates, Concrete Scan with Ground Penetrating Radar (GPR), rushlocates.com, read 16 November 2026.
  3. RentGPRFlorida, GSSI StructureScan Mini XT rental, rentgprflorida.com, read 16 November 2026.
  4. Trade2Base blog, Concrete Cutting and Drilling Pricing UK, 8 June 2026, trade2base.com, read 16 November 2026.
  5. Insurance Information Institute, Facts and Statistics: Homeowners and renters insurance, iii.org, read 16 November 2026.
  6. WaterSafe blog, Tackling Escape of Water Claims is a Priority for Insurers, by the ABI, watersafe.org.uk, read 16 November 2026.
  7. Cash., Mehr als eine Million Leitungswasserschaeden pro Jahr, quoting HDI Versicherung, cash-online.de, read 16 November 2026.
  8. Best Builders, Underfloor Heating Repair Cost UK 2026, bestbuilders.co.uk, read 16 November 2026.
  9. MyJobQuote, Structural Engineer Costs, myjobquote.co.uk, read 16 November 2026.

Questions

How much does GPR concrete scanning cost?

In the United States, firms' own pages give USD 150 to 350 an hour, often with a two-hour minimum, so the shortest visit starts around USD 350 to 400. A vendor's market estimate for a full day is about USD 1,000 to 3,000. In the UK a trade blog gives GBP 150 to 400 a visit. We found no published price from a firm in Germany, Switzerland, Austria or France: ask for a quote. Sources are listed on this page.

Can I rent a concrete scanner near me?

In the US, yes: one Florida hire firm lists concrete radar from USD 350 a day and delivers for USD 129 each way, and a rental marketplace lists a Leica C-Thrue at USD 749 a week. In the UK, Germany and Switzerland we found concrete radar only on request or behind a log-in, and wall detectors from about EUR 22 or CHF 23 a day. A wall detector is not concrete radar.

Is hiring a rebar scanner worth it for one job?

For one job, with someone who can read radar, often yes: a day of hire costs a fraction of buying. The hire gives you the tool, not the skill: one firm sells a day of training from USD 1,995, and its rental form leaves the risk of use with the renter.

What does a scanning firm give me that a rental does not?

An operator who interprets the data on site, marks on the concrete, a written report where the job requires one, and for some firms a stated insurance. What a firm answers for if something is still hit is set in its contract.

If I own Eagle XR, do I still need a scanning firm?

Yes, for post-tensioned slabs, structural cuts and anything that needs a report. Screening Eagle calls Eagle XR a first look for everyday work and says it does not replace an expert. It covers the daily anchors, small cores and chases, so you know whether a spot is clear or whether to call one.

Is Eagle XR a GPR?

No, says Screening Eagle: it is a first look for everyday work that shows what is inside a wall, slab or column. For investigations, mapping and reports, professionals use GPR systems such as Proceq's.

Own the first look

Eagle XR costs CHF 3,950, EUR 4,190, USD 4,830 or GBP 3,590, excluding VAT, import taxes and delivery, the same in every finish. Ordering happens on Screening Eagle's shop.

Buy in Solar Gold

Partner link: we may earn a commission. You pay Screening Eagle's normal price.

  • Sold and shipped by Screening Eagle
  • Same price in all four finishes
  • Card, Apple Pay or Google Pay
  • Express shipping from Switzerland. US orders ship from Pennsylvania

More before you decide: Specs, Before you buy, Compare scanners, Eagle XR or Proceq GPR, Post-tensioned slabs, Jobs by trade.

Sources

  1. Rush Locates, Concrete Scan with Ground Penetrating Radar (GPR), rushlocates.com, read 16 November 2026.
  2. Arcbound Logic, Concrete GPR Scanning Cleveland & Northeast Ohio, arcboundlogic.com, read 16 November 2026.
  3. SiteTwin, Concrete Scanning Services in Texas, sitetwin.store, read 16 November 2026.
  4. SPH Engineering, Ground Penetrating Radar Price & GPR Survey Cost (2026), sphengineering.com, read 16 November 2026.
  5. Trade2Base blog, Concrete Cutting and Drilling Pricing UK, 8 June 2026, trade2base.com, read 16 November 2026.
  6. Penhall, Slab Scanning 101: When You Need It and What it Includes, penhall.com, read 16 November 2026.
  7. RentGPRFlorida, GSSI Structure Scan Mini XT Rental (with its rental form), rentgprflorida.com, read 16 November 2026.
  8. RentGPRFlorida, home page: Equipment for Rent and GPR Training, rentgprflorida.com, read 16 November 2026.
  9. KWIPPED, Leica C-Thrue Ground Penetrating Radar, kwipped.com, read 16 November 2026.
  10. Boels Rental Germany, Multidetektor, professionell (Wand), article 17547, boels.com, read 16 November 2026.
  11. Boels Rental Switzerland, Multidetector (wand), article 11412, boels.com, read 16 November 2026.
  12. Hygglo UK, Bosch D-tect 120 Wall scanner, a private listing, hygglo.com, read 16 November 2026.
  13. Hilti Switzerland, Mietpreisliste für Flottenkunden (08/2025), hilti.ch, read 16 November 2026.
  14. Screening Eagle, Eagle XR product page and FAQ, xr.screeningeagle.com, read 15 and 16 November 2026.
  15. Screening Eagle, official Eagle XR shop, store.screeningeagle.com, read 14 November 2026.
  16. Trinity Subsurface, Scanning Post-Tension Slabs Before You Core or Cut, trinitysubsurface.com, read 16 November 2026.
  17. GSSI, Using GPR Scanning Prior To Concrete Cutting Saves Money and Avoids Hazardous Conditions (article of 2 July 2019), geophysical.com, read 16 November 2026.