Scan before you drill

Home / How it works

How it works eight scenes you can touch

How radar sees into concrete

A concrete scanner sends a short radio pulse into the wall and times the echo. Depth, the arches on a radar screen and most of the limits follow from that one measurement. Drag, slide and watch, one idea at a time.

Teaching model The drawings are our own simplified physics, computed in your browser. They are not output from Eagle XR or any other scanner. Every number in the text has a source at the foot of the page.

01Echoof 08

A pulse goes in, an echo comes back

The scanner sends a very short pulse of radio energy into the concrete. Where the material changes, at a steel bar for example, part of the energy bounces back1.

The scanner records when each echo comes back, and how strong it is. For depth, the time there and back is all it has1. It is a tiny time: in moderately dry concrete a bar 10 cm down answers after about 1.7 billionths of a second124.

Next: 02 Speed

The drawing shows: A scanner on the concrete surface sends a pulse down to a steel bar 10 cm deep. The echo comes back up. On the trace beside it, time runs downwards: a band at the top where the pulse leaves, and the echo from the bar after 1.67 nanoseconds.

Fig. 1 Section through concrete with one steel bar, and the echo trace the scanner records over time. Slowed down: 1 nanosecond takes 1 second.

02Speedof 08

Time becomes depth, if you know the speed

Radio waves cross air at about 30 cm per nanosecond4. In a material they slow down: the speed is the speed of light divided by the square root of the material's relative permittivity, v = c / √ε2. Water has a permittivity of 81, so the wetter the concrete, the slower the wave1.

GSSI puts most concretes between 4.5 and 9, and uses 6.25 for moderately dry and 9 for moist1. Screening Eagle's GPR team gives 7 to 12, depending on the mix and the water in it5. The same bar then answers at a different time, so a scanner set for the wrong concrete draws it at the wrong depth1.

Next: 03 Arch

The drawing shows: Two lanes, each 10 cm deep with a bar at the bottom: one of air, one of concrete. A pulse runs down each lane and back. In air it returns after 0.67 nanoseconds; in moderately dry concrete, permittivity 6.25, after 1.67 nanoseconds. A time ruler below marks both arrivals.

Fig. 2 The same 10 cm, crossed by the same pulse: in air, and in concrete at the moisture you set. The open ring shows where a scanner set for 6.25 would draw the bar.

03Archof 08

Slide the scanner and an arch appears

The beam spreads out in a cone, about 60 degrees wide in GSSI's description, so the scanner hears a bar before it reaches it and after it has passed1. Off to one side the path is longer and the echo comes later: t = 2√(d² + x²) / v for a bar at depth d and a scanner x to one side23.

Put the echoes side by side and they draw an arch. Its peak sits right above the bar1. Faster, drier concrete draws a wider arch1; by the same formula, a deeper bar draws a later and flatter one.

Next: 04 Echoes

The drawing shows: Top: a section through concrete with one steel bar 10 cm deep and a scanner on the surface; a dashed line joins them. Bottom: the recorded slice, time running downwards. The echoes form an arch whose peak, 1.67 nanoseconds down, sits right under the bar; either side it falls away, later the further the scanner is from the bar.

Fig. 3 Top: section with the scanner on the surface and the echo path to the bar. Bottom: the slice the scanner records, one column per position. Drag the scanner or use the slider.

04Echoesof 08

Steel, plastic, air and water answer differently

How strong an echo is depends on how different the two materials are1. Steel reflects all of the energy, so it draws the brightest arch15. An air void answers strongly too, but with the opposite sign, because the wave speeds up in air1.

Plastic is nearly transparent to radar, so a plastic pipe shows what is inside it: weak and reversed if it holds air, strong if it holds water1. The back of a slab is a flat band, not an arch: bright and reversed with air beneath it, faint or missing on sand1. Here, as in GSSI's default colours, steel's main band is white and air's is black1.

Next: 05 Hiding

The drawing shows: A slab with four objects 10 cm deep, from left: a steel bar, a plastic pipe holding air, a plastic pipe holding water, and an air void; air under the slab. In the slice the steel bar draws a bright arch with a white main band; the water pipe a strong white arch; the air void a strong but ragged arch with a black main band; the air-filled pipe a faint black one. The back of the slab is a flat black band.

Fig. 4 Top: an elevated slab, 22 cm thick, holding a steel bar, a plastic pipe with air in it, one with water in it and an air void, all 10 cm deep. Bottom: the slice, with the echo trace under the scanner drawn over it.

05Hidingof 08

What hides things

A mesh of 5 by 5 cm or finer acts like sheet metal: nothing below it shows. At 10 to 15 cm it is semi-transparent1. A bar directly under a top bar is harder to see1.

Water also soaks up the signal, so you see deeper in old, dry concrete than in young or wet concrete; in very conductive concrete GSSI's reach falls to 15 cm or less1. Screening Eagle's GPR team advises against scanning fresh concrete at all5. And two bars at the same depth closer than about 5 cm usually show as one1.

Next: 06 Two ways

The drawing shows: A slab with a top mesh of bars 15 cm apart, a water pipe 17 cm deep below it and the back of the slab at 28 cm. In the slice the mesh draws a row of arches near the top; the pipe and the back still show below it. Closing the mesh to 5 cm turns it into one bright layer and hides everything below. The other two settings show wet concrete fading the deep echoes, and two bars merging into one arch when they are closer than about 5 cm.

Fig. 5 Section and slice for three things that hide what is in the wall. Pick one, then change it with the slider.

06Two waysof 08

Why you scan in two directions

An arch only forms when the line crosses the bar. Turn the line until it runs along the bar and the arch flattens into a band at the bar's depth, which looks like a layer1.

Dipole antennas such as GSSI's are also least sensitive to metal lying along the line, so that band can be faint1. That is why GSSI's advice for clearing a spot to drill is a survey in two perpendicular directions1.

Next: 07 Picture

The drawing shows: Plan view of a wall with one bar running left to right and a scan line crossing it at 90 degrees. The slice along that line shows a full arch. As the angle closes, the arch gets wider and flatter; at 0 degrees, with the line along the bar, it is a flat, fainter band at the bar's depth.

Fig. 6 Left or top: plan view of the wall, with the bar and your scan line. Right or bottom: the slice recorded along that line.

07Pictureof 08

From arches to a picture

A classic GPR screen shows the raw slice, and a trained operator reads the arches1. GPR software can also fold each arch back into a spot at its peak, a step called migration12.

Screening Eagle says the Eagle XR app shows "rebar, cables, plastic pipes and even air voids, shown in color at their depth, plus the back of the element", with "no squiggly lines to decode"67. Beyond "computational imaging, powered by Eagle Intelligence", how it builds that picture is not published6. A scan is one line at a time, in one direction8.

Next: 08 Limits

The drawing shows: One slice through a wall with a row of bars near the surface, a cable, a plastic pipe, a deeper row of bars and the back of the wall. On the left half, the raw slice: grey with white and black arches. On the right half, the same data with each arch folded into a spot at its peak, on a dark ground, coloured orange for rebar, yellow for the cable, blue for the plastic pipe, with a line for the back wall.

Fig. 7 One slice from our model. Left of the divider: the raw arches. Right: the same data migrated in your browser and coloured by what we put in the wall. Our drawing of the idea, not a screenshot of the Eagle XR app.

08Limitsof 08

What a scan cannot tell you

A scan shows that something is there, and roughly how deep. It cannot size a bar: anything under about 5 cm across draws the same arch, only somewhat brighter when larger1. Drag the diameter and watch the shape stay put.

  • Depth is an estimate. GSSI states about 6 mm or 5% for its own systems after calibrating on a known target, and up to 20% off with an assumed concrete type1.
  • An echo is a change of material, not of current1. Nothing in it says a cable is live. Treat every cable as live and have it proved dead: see checking for live cables.
  • A post-tensioned slab needs the engineer. No scan replaces the engineer of record there: read drilling post-tensioned slabs first.
  • Eagle XR is a first look. Screening Eagle calls it "a first look for everyday work", so you know "whether it's clear or whether to call an expert"6.

Next: questions and sources

The drawing shows: A section with one bar 10 cm deep and its arch in the slice below. A thin outline shows the arch of an 8 mm bar at the same depth. At 12 mm and at 40 mm the arch has the same shape and peak; only its brightness changes a little.

Fig. 8 A bar 10 cm deep, drawn at the diameter you set, and its arch. The thin line is the arch of an 8 mm bar at the same depth, for comparison.

What is simplified in the model

  • The walls, slabs and objects are invented. Nothing here was scanned.
  • Our pulse is a textbook 2 GHz wavelet, a frequency inside the 1.6 to 2.6 GHz of the GSSI antennas in its handbook. Eagle XR's own frequency is not published.
  • Bars are treated as points at their depth; the transmitter and receiver sit at one spot. Real antennas have both a little apart.
  • How fast an echo fades to the side, how fast water soaks up the signal and the strength of each echo are our choices, set to match the handbook's descriptions, not measured values.
  • The picture in scene 7 is a migration of our own slice, coloured by what we put in the wall. It is not how the Eagle XR app works, which is not published.

To see what scanning with Eagle XR is like, try the Scan lab or the site walkthrough. To read real slices, see how to read a concrete scan. To weigh up tools, see the comparison.

Questions

Why does rebar show as an arch on a radar scan?

The radar beam spreads out in a cone, so the scanner hears a bar before it is above it and after it has passed. To one side the path to the bar is longer, so the echo arrives later and is drawn deeper. Plotted along the scan line, the echoes form an arch, and its peak marks where the bar is. GSSI describes the beam as a cone about 60 degrees wide.

How does a concrete scanner work out depth?

It measures the time an echo takes to go down and come back, and multiplies by the speed of the wave in that concrete. The speed is the speed of light divided by the square root of the concrete's relative permittivity: about 12 cm per nanosecond at 6.25, the value GSSI uses for moderately dry concrete. Depth is half of speed times the two-way time.

Why does wet concrete change the depth reading?

Water has a relative permittivity of 81, so water in the concrete slows the wave. The same bar then answers later, and a scanner set for drier concrete draws it too deep. Water also soaks up the signal, so you see less far into young or wet concrete. GSSI says depth from an assumed concrete type can be off by as much as 20%.

Can radar see through a dense rebar mesh?

Not through a fine one. GSSI's handbook says a mesh of 5 by 5 cm or smaller acts like sheet metal and is impenetrable, while a mesh of 10 to 15 cm is semi-transparent. Bars directly beneath top bars are also harder to see than bars that sit offset.

Can a radar scan tell whether a cable is live?

No. An echo comes from a change of material, such as metal, plastic, water or air in concrete, and says nothing about current. Treat every cable as live and have it proved dead before you drill near it. Our guide to drilling drywall and masonry covers checking for live cables.

Are the drawings on this page real Eagle XR scans?

No. They are our teaching model, computed in your browser from the physics on this page. Screening Eagle says the Eagle XR app shows rebar, cables, plastic pipes and air voids in colour at their depth, plus the back of the element. To see what scanning with it is like, try the Scan lab.

See inside your own wall

Eagle XR pairs with your phone and, Screening Eagle says, shows every object "in color, at its depth", to a stated 40 cm in concrete. CHF 3,950 per scanner, excluding VAT, import taxes and delivery. Ordering happens on Screening Eagle's shop.

Buy in Solar Gold

Partner link: we may earn a commission. You pay Screening Eagle's normal price.

  • Sold and shipped by Screening Eagle
  • Same price in all four finishes
  • Card, Apple Pay or Google Pay
  • Express shipping from Switzerland. US orders ship from Pennsylvania

Sources

  1. GSSI, Concrete Handbook MN72-367 Rev H, GPR Inspection of Concrete, read 16 November 2026, atecorp.com
  2. US Environmental Protection Agency, Environmental Geophysics: Ground Penetrating Radar (GPR), read 16 November 2026, epa.gov
  3. University of British Columbia, EOAS, EOSC 350: Ground Penetrating Radar, concepts and examples, read 16 November 2026, eoas.ubc.ca
  4. University of British Columbia, EOAS, EOSC 350: GPR notes, table of velocities from an instrument manual, read 16 November 2026, eoas.ubc.ca
  5. Katelyn Gennuso, Screening Eagle (Proceq), Uncovering the hidden secrets of concrete: what GPR can (and can't) reveal, read 16 November 2026, screeningeagle.com
  6. Screening Eagle, Eagle XR product page and FAQ, read 15 November 2026, xr.screeningeagle.com
  7. Screening Eagle Technologies AG, Eagle XR on the App Store, read 15 November 2026, apps.apple.com
  8. How a scan runs: this site's own Eagle XR unit, 15 November 2026

Physics sources opened and read on 16 November 2026. Eagle XR statements are Screening Eagle's own, read on 15 November 2026.