Home / Jobs
Jobs fifteen trades, eleven 3D situations
See your own job before you buy
Pick your trade: the jobs you do, a live 3D situation to try, how professionals do it with sources, where Eagle XR fits, where it does not, and the questions your trade asks.
Your trade
Electricians
Back boxes, conduit runs, containment and cores: find the cable before the bit does.
Plumbers and heating engineers
Risers, waste cores, trenches and underfloor heating: find the pipe, the conduit and the bar.
Sprinkler fitters and HVAC installers
Hangers, trapezes and duct risers: overhead anchors where depth matters as much as position.
Lift and elevator installers
Guide rail brackets, entrance fixings and pit anchors in shaft walls.
Core drilling and concrete cutting
Cores, wall saw openings and trenches: the jobs where one hit costs the most.
Facility and property managers
Retrofits, fit-outs and drilling permits in occupied buildings.
Engineers and architects
Is it reinforced, where are the bars, how thick is it: a first look before you specify a survey.
Renovators and homeowners
Shelves, kitchens, bathrooms and the odd doorway: know what is in your wall.
EV charger installers
Wallboxes in home garages, chargers in condo and parking garages: wall fixings, cable cores and PT decks.
Heat pump and air conditioning installers
Line set holes, condensate, flue cores and outdoor unit brackets in concrete, block and brick walls.
Solar and battery installers
Inverters and home batteries on concrete, block and brick walls, cable entries, and flat-roof fixings.
TV and AV installers
TV brackets, hidden cable routes, projector and speaker mounts in concrete walls and ceilings.
Security and smart home installers
Cameras, alarms, door entry and access control: cable holes through walls you did not build.
Kitchen fitters and appliance installers
Wall units, cooker hood cores, dryer vents and appliance hook-ups in walls full of pipes.
Inspectors and surveyors
Pre-purchase inspections, condition surveys and test locations: a quick first look into concrete, not a survey.
Which tool for which job?
Four questions. The answer is Eagle XR, a GPR professional, the engineer, or a question for Screening Eagle first. Nothing is sent anywhere.
The rules behind the answer
- A survey, mapping or a report, or a documented result for someone else: call a GPR professional. Not a GPR: a first look for everyday work, to see whether a spot is clear or whether to call an expert; for investigations, mapping and reports, Screening Eagle points professionals to GPR systems1.
- Post-tensioned, or not sure: stop and involve the engineer, and a scanning professional. Treat the slab as post-tensioned until the engineer or the drawings confirm otherwise, whatever a scan shows2. Eagle XR lists PT ducts3, and a first look helps you talk to the engineer, but the decision is theirs.
- Tiles, screed, metal deck or another surface: ask Screening Eagle first. It lists concrete (dry, normal or wet), drywall and masonry (brick and block) on the App Store listing3, while the product page says Eagle Intelligence is trained on concrete and learning more materials1. Radar in general does not see through a continuous metal layer4.
- Otherwise (anchors, a core or a cut in concrete or masonry, not PT, a first look for your crew): this is what Eagle XR is for, in Screening Eagle's words "before every hole, core or cut"1. Scan two directions over every location5, with room to move the hole2. It is a first look, not a clearance: structural changes still go to the engineer.
Every situation in the Scan lab
Eleven 3D situations. Slide the scanner along one line, in one direction, then look through the concrete. Our teaching model, not output from Eagle XR.
Ready for your own wall?
CHF 3,950per scanner, excluding VAT, import taxes and delivery. Ordering happens on Screening Eagle's shop.
Buy in Solar GoldPartner link: we may earn a commission. You pay Screening Eagle's normal price.
- Sold and shipped by Screening Eagle
- Same price in all four finishes
- Card, Apple Pay or Google Pay
- Express shipping from Switzerland. US orders ship from Pennsylvania
Sources
- Screening Eagle, Eagle XR product page and FAQ, read 15 November 2026, xr.screeningeagle.com
- Trinity Subsurface, Scanning Post-Tension Slabs Before You Core or Cut, read 16 November 2026, trinitysubsurface.com
- Apple App Store, Eagle XR listing by Screening Eagle Technologies AG, read 15 November 2026, apps.apple.com
- SPH Engineering, GPR Scanning in Concrete to Find Rebar, PT Cables and Voids, read 16 November 2026, sphengineering.com
- Associated Builders and Contractors, Central Texas chapter, GPR Concrete Scanning Before the Core Drill Starts, read 16 November 2026, abccentraltexas.org